Now accepting credit card payments Visa, Mastercard and American Express accepted Open 6 days, emergency leaks around the clock Waterproofing certificate supplied
Fresh bead of silicone along the wall and floor junction of a shower
Silicone & sealant work

Shower & Bathroom Silicone Replacement Sydney

The silicone in your wet areas is the flexible seal that handles movement where tiles and grout can't. When it perishes or grows mould, water gets in. We strip and replace the silicone in showers, around screens, baths and junctions across Sydney.

1300 525 699
At a glance
  • Mould removed we don't seal over it
  • Showers, screens & baths every wet-area junction
  • 24-hour return in most cases
  • Across Sydney a specialist comes to your home
  • Backed in writing 100% workmanship guarantee on the new seal
What silicone does

Why The Silicone Matters

Silicone seals the junctions that move — wall-to-floor, around the shower screen, along the bath and vanity. Unlike grout it flexes, which is exactly why it's used there and why it perishes and needs replacing over time.

It pairs naturally with full shower resealing when the whole recess needs attention, and resealing the silicone is part of permanent leaking shower repairs. If the bead keeps going black, our guide on how to remove mould from shower silicone explains why.

When it's the silicone

Signs Your Silicone Has Perished

Replace the silicone when you see:

Cracked, peeling or lifting beadsThe seal has hardened and let go.
Black mould along the jointsWater is sitting behind the silicone and feeding the mould.
Gaps at the wall, floor or screenOpen junctions let water straight in.
Discoloured, stained siliconeIt has broken down and needs replacing.
Our process

How We Replace Silicone Properly

A smear of new silicone over old never lasts. Doing it properly does:

Cut out the old silicone

We remove every trace of the perished or mouldy bead.

Treat the mould behind it

So it doesn't grow straight back through the new seal.

Clean & dry the junction

The joint is prepared so the new bead bonds.

Lay a fresh bead

A quality sanitary silicone in an even, watertight bead.

What it costs

The Price of a Full Silicone Replacement

A full silicone replacement is one of the lower-cost leak repairs, because no tiles come up and most showers are finished in a single visit. The price is set by how much silicone there is to strip and what is sitting behind it.

What sets the price of a silicone replacement
What we look atHow it affects the price
Length of the jointsA single shower recess has far less silicone than a recess, a bath and a vanity done together.
Mould behind the beadMould that has grown under the old silicone has to be treated before a new bead will bond.
Screen and hob edgesFramed screens, base channels and hobs add joints that take longer to strip and reseal neatly.
Grout or membrane problemsIf the grout has cracked or the membrane has failed, new silicone alone will not stop the leak and the scope changes.

Price drivers only, not a quote. We confirm a fixed price in writing once we have seen the shower.

When you compare quotes for a shower silicone repair, ask whether the old bead is cut out completely and the joint dried before the new silicone goes on. That preparation, more than the price per metre, decides how long the seal lasts.

Who does the work

A Specialist Finish, Not a Handyman Bead

Silicone is the last line of defence at every joint that moves, so who applies it matters. Fix Leaking Showers is NSW Fair Trading licensed and fully insured, and we have worked on Sydney showers, baths and wet areas for more than 20 years.

A handyman bead usually goes straight over the old one. It looks clean for a few weeks, then lifts at the edges because it never bonded to the tile. Our shower silicone replacement takes the old sealant back to a clean, dry joint and tools the new bead so water runs off it and not behind it.

  • NSW Fair Trading licensed
  • Fully insured
  • More than 20 years on Sydney wet areas
  • Sanitary, mould-resistant silicone
  • Old bead cut out before the new one goes on
  • Written workmanship guarantee

When should shower silicone be replaced?

The signs it is time to reseal.
SignWhat it meansAction
Silicone going blackMould in and under the sealReplace the silicone
Splitting or lifting at the cornersThe seal has lost flexibilityReplace the silicone
Water escaping at the wall-to-floor jointThe seal has failedReseal the junction
Silicone & Sealant Work

Frequently Asked Questions

What's the difference between silicone and grout?
Grout fills the gaps between tiles and is rigid; silicone seals the junctions that move and is flexible. A watertight wet area needs both doing well.
Can you remove the mould from the silicone?
We don't just clean it — we remove the mouldy silicone entirely and treat behind it before resealing, so it doesn't grow back.
How long until I can use the shower?
Usually water-ready within about 24 hours, depending on the product. We confirm on the quote.
Do you reseal around baths and vanities too?
Yes — any wet-area junction: showers, screens, baths, vanities and splashbacks.
Do you cover my suburb?
Yes. We replace shower silicone in all 33 Sydney council areas, and we come to you.
Is it guaranteed?
Yes. The new silicone is covered by our 100% workmanship guarantee, which you receive in writing.
How much does it cost to replace shower silicone?
It depends on how many metres of joint need replacing, how much mould has to be treated behind the old bead, and whether screens, hobs or a bath are included. We inspect the wet area and confirm a fixed price in writing before any work starts.
Who replaces the silicone: a specialist or a handyman?
A wet-area specialist. Fix Leaking Showers is NSW Fair Trading licensed and fully insured, and we strip the old silicone completely before a new bead goes on.
How long should new silicone cure before I use the shower?
Allow about 24 hours for most sanitary silicones. A cold or humid bathroom can slow the cure, so we tell you the wait for the product we used before we leave.
No obligation

Silicone Perished Or Mouldy?

We'll strip it and reseal properly. Book a quote across Sydney, six days a week.

1300 525 699