Bathroom Waterproofing Cost in Sydney (2026 Price Guide)

Bathroom waterproofing cost in Sydney depends on how much area is being waterproofed, how much preparation the surface needs, how many corners, penetrations and drains there are, and whether existing tiles have to come off first. This guide sets out what you are paying for and how shower, bathroom and balcony jobs compare. It gives relative costs, not dollar figures, because a price needs the room to be seen.
- Preparation and detail work set the price more than square metres do.
- Re-waterproofing an existing shower costs more than waterproofing a new one, because the old finish has to come off first.
- A proper quote names the areas, the system, the standard and the certificate.
How much does it cost to waterproof a bathroom?
There is no single figure, and anyone who gives one without seeing the room is guessing. The cost of waterproofing a bathroom is built from labour, materials and time. Labour is the largest part, and most of the labour is in preparing the surface and detailing the junctions, not in rolling on the membrane.
What can be said in general is how jobs rank. A shower recess on a prepared new surface is the smallest job. A full bathroom floor with the shower is larger. Re-waterproofing an existing tiled shower is larger again, because the tiles and bed in the affected area have to be removed and the surface made good before any membrane goes down.
What drives the price
- Area. The floor and wall area to be covered, including how high the membrane goes up the walls.
- Preparation. A clean, dry, sound surface with the right fall to the waste costs little to prepare. A damaged or uneven one has to be repaired first.
- Detail. Every corner, wall-to-floor junction, hob, niche, tap penetration and drain is treated individually. A small ensuite can have as many of these as a large bathroom.
- Removal. Whether existing tiles, screed or an old membrane have to be taken up.
- The membrane system. Different products and substrates need different primers, reinforcing and numbers of coats.
- Access and timing. Upper floors, apartments with booking rules and jobs that need more than one visit for curing.

Shower, bathroom and balcony: how the cost differs
Shower waterproofing cost, the cost of a whole bathroom and the cost of a balcony are different questions, because the jobs differ in size, exposure and detail.
| Job | What is involved | Relative cost |
|---|---|---|
| Shower recess, new or stripped surface | Floor, hob and walls of the shower, junctions and waste | Lowest |
| Whole bathroom floor plus shower, new surface | The shower, the full floor and the wall-to-floor junctions | Moderate |
| Re-waterproofing an existing tiled shower | Tiles and bed lifted in the affected area, surface made good, new membrane | Higher |
| Re-waterproofing a whole existing bathroom | As above across the full room | Higher again |
| Tiled balcony | An exposed surface with falls, drains, door thresholds and balustrade fixings | Varies widely with size and condition |
These are rankings, not prices. A fixed price for your job follows an inspection.
Balconies sit apart from bathrooms. They are outdoors, they are larger, and their drainage and edges add work, so they are always priced on inspection.
DIY waterproofing versus a licensed waterproofer
Membrane from a hardware store costs far less than a waterproofer’s invoice, which is why DIY looks attractive. The saving is real only if the membrane works for the life of the bathroom, and there is no way to check that once the tiles are down. A membrane that fails takes the tiles, the bed and often the wall linings with it.
In NSW, anyone you pay to do waterproofing worth more than $5,000 in labour and materials must hold a contractor licence. A licensed waterproofer also supplies what a DIY job cannot: a certificate that the work meets the standard, which strata committees, certifiers, insurers and buyers ask for. For how the work is done, see how showers are waterproofed.
What a waterproofing quote should include
- The areas covered, with wall heights, not just “waterproof bathroom”.
- Preparation: what will be removed, repaired or levelled first.
- The system: the type of membrane, primer and reinforcing.
- The standard the work will meet. For internal wet areas that is AS 3740.
- The certificate you will receive.
- Curing time before tiling or use, and how many visits.
- What is excluded, such as tiling, screeding or plumbing.
- The contractor’s NSW licence details and the guarantee.
Our bathroom waterproofing is quoted as a fixed price for a defined scope after an inspection. Internal wet-area work is carried out to AS 3740, a waterproofing certificate is supplied, and the work carries a 100% workmanship guarantee in writing. To have a job priced, get a waterproofing quote.
Is it worth it
Waterproofing is the one part of a bathroom that cannot be inspected or improved after the tiles are laid. Done properly, it is a small share of what a bathroom costs. Done badly, it is the reason the bathroom is rebuilt. Set against the cost of replacing tiles, wall linings, flooring and the ceiling of the room below, paying for a certified job is the cheaper option by a long way.

Avoiding paying for waterproofing twice
- Use a licensed waterproofer and ask for the certificate before final payment.
- Do not let tiling start until the membrane has cured for the time the product requires.
- Make sure the floor falls to the waste before the membrane goes on. A membrane does not fix ponding.
- Have every penetration sealed: taps, the shower arm, niches and the waste.
- Keep trades off the cured membrane until it is tiled, and protect it from dropped tools.
- Keep the certificate and the product details with your house records.
Frequently asked questions
How much does waterproofing cost?
It depends on the area, the preparation needed, the amount of detail work and whether old tiles have to be removed. A shower on a prepared surface costs least, and re-waterproofing an existing tiled bathroom costs most. A fixed price follows an inspection.
How much does it cost to waterproof a shower?
A shower recess is the smallest waterproofing job when the surface is new or already stripped. Re-waterproofing an existing tiled shower costs more, because tiles and bed in the affected area have to be lifted first.
How much does it cost to waterproof a balcony?
Balconies are priced on inspection. They are exposed to weather and usually larger than a shower, and their drains, door thresholds and balustrade fixings add detail work, so the cost varies widely.
Is waterproofing priced per square metre?
Area is one input, but a rate per square metre misleads for small wet areas, where corners, junctions, penetrations and drains take most of the time. Expect a fixed price for a defined scope instead.
Does the price include a waterproofing certificate?
It should. For internal wet areas our waterproofing is carried out to AS 3740 and the certificate is supplied with the job. Ask any waterproofer to confirm in the quote that a certificate is included.
Is it cheaper to re-waterproof part of a bathroom?
Yes, when the fault is confined to one area. Re-waterproofing the shower alone costs less than the whole room. It only works if the rest of the bathroom membrane is sound, which the inspection has to confirm.
Got a leaking shower?
Book an inspection and a fixed-price quote. We come to you, anywhere in Sydney.
Get my quote
